IC697CMM741 | 可編程邏輯控制器模塊 | 指示燈中有 3 個提供串行端動狀態
產品參數:
型號:IC697CPX782
一輸入電壓:24V DC
輸出電壓:5V DC
通信:以太網，RS-232,RS-485
·內存容量:64K字
GEIC697CPX782 plc模塊是一款高性能可編程邏輯控制器模塊，專為工業自動
化應用而設計。它提供了先進的功能和可靠性，使其適用于廣泛的控制系統要
求。
IC697CPX782模塊是設計用于GE Fanuc系列90-70可編程邏輯控制器的CPU模塊。除了 1 MB 的電池備份存儲器外，該模塊還包括 256 KB 的非易失性存儲器。IC697CPX782 模塊在版本 7.92 及更高版本中支持 BMA。IC697CPX782模塊所基于的微處理器是 80486DX4 微處理器，時鐘速度為 96 兆赫茲。IC697CPX782 模塊支持的 I/O 包括最多 8000 個模擬 I/O 和 12,000 個 I/O(任意混音)。處理單個布爾函數所需的額定時間為 0.4 微秒。IC697CPX782模塊支持系統內固件升級。模塊的配置是通過計算機上運行的軟件執行的，這些軟件通過以太網或串行連接與模塊連接。
通過以太網將編程器連接到IC697CPX782模塊需要在 PLC 中安裝以太網接口模塊。 可以通過 3 個板載串行端口通過串行端口將編程器連接到IC697CPX782模塊。3個端口支持的協議如下：端口1支持RS-232通信，端口2和端口3都支持RS-485通信。模塊前面板上的 5 個 LED 指示燈中有 3 個提供串行端動狀態。
Product parameters:
Model :IC697CPX782
One input voltage :24V DC
Output voltage :5V DC
Communication: Ethernet, RS-232,RS-485
· Memory capacity :64K words
The GEIC697CPX782 plc module is a high-performance programmable logic controller module designed for industrial automation
Designed for application. It offers advanced features and reliability that make it suitable for a wide range of control systems
Please.
The IC697CPX782 module is a CPU module designed for GE Fanuc series 90-70 programmable logic controllers. In addition to 1 MB of battery backup memory, the module includes 256 KB of non-volatile memory. The IC697CPX782 module supports BMA in version 7.92 and later. The microprocessor on which the IC697CPX782 module is based is the 80486DX4 microprocessor with a clock speed of 96 MHZ. The IC697CPX782 module supports up to 8,000 analog I/ OS and 12,000 I/ OS (any mix). The rated time required to process a single Boolean function is 0.4 microseconds. The IC697CPX782 module supports firmware upgrade in the system. The configuration of the module is performed by software running on the computer, which is connected to the module via Ethernet or serial connection.
Connecting the programmer to the IC697CPX782 module via Ethernet requires an Ethernet interface module to be installed in the PLC. The programmer can be connected to the IC697CPX782 module via 3 on-board serial ports. The three ports support the following protocols: Port 1 supports RS-232 communication, and port 2 and port 3 both support RS-485 communication. Three of the five LED indicators on the front panel of the module provide serial terminal status.
