>>>>>型號:REF615E RET615 變壓器保護測控裝置 用于保護和測控雙繞組
【功能描述】
專用的變壓器保護測控裝置，用于保護和測控雙繞組電力變壓器、廠用變壓器和升壓變壓器組，包括電力系統和配電系統中的發電機-變壓器組
RET615 變壓器保護測控裝置是專用的變壓器保護測控裝置，用于保護和測控雙繞組電力變壓器、廠用變壓器和升壓變壓器組，包括電力系統和配電系統中的發電機-變壓器組。
RET615 變壓器保護測控裝置提供八個標準配置，使變壓器應用適合不同中性點接地方式的高阻接地或低阻接地相應的接地故障保護方案。所有使用的電力變壓器向量組的 CT變比差和相移都得以數字化補償。RET615 的特征還包括適應變壓器高壓側斷路器的本地或遠程控制。
RET615 變壓器保護測控裝置以支持變電站 IEC61850 通信標準、并行冗余協議（PRP）和高可用性無縫冗余度協議（HSR）為特點，其中 IEC61850 通信標準包含 IEC 61850-9-2 LE。該裝置還支持 DNP3、 IEC 60870-5-103 和 Modbus? 規約。SPA-ZC 302 適配器規約支持 Profitbus DPV1 規約。對于冗余以太網解決方案，RET615 提供帶以太網界面的可選通信模塊。冗余以太網解決方案建立在基于以太網的 IEC 61850、Modbus? 和 DNP3 規約。RET615 中的 IEC61850 標準涉及縱向通信和水平通信，包括帶開關量信號和模擬量信號的 GOOSE 報文，以及基于 IEC 61850-8-1 的參數整定。RED615 同樣支持帶模擬電壓采樣值的過程層總線。利用該功能特性，以太網通信可以替代模擬量電信號布線。利用 IEC 61850-9-2LE 規約，測量值作為采樣值傳遞。
>>>>>型號:REF615E RET615 變壓器保護測控裝置 用于保護和測控雙繞組
【英文介紹】
Special transformer protection measurement and control devices for the protection and measurement and control of double-winding power transformers, plant transformers and booster transformer groups, including generator-transformer groups in power systems and distribution systems
RET615 Transformer protection measurement and control device is a special transformer protection measurement and control device for the protection and control of double-winding power transformers, plant transformers and boost transformers, including generator-transformer groups in power systems and distribution systems.
The RET615 transformer protection measurement and control device is available in eight standard configurations to enable the transformer to apply a ground fault protection scheme suitable for high resistance ground or low resistance ground in different neutral ground modes. The CT ratio difference and phase shift of all used power transformer vectors are digitally compensated. The RET615 also features local or remote control of transformer high-voltage circuit breakers.
The RET615 transformer protection measurement and control device features support for the substation IEC61850 communication standard, Parallel Redundancy Protocol (PRP), and High Availability Seamless Redundancy Protocol (HSR), where the IEC61850 communication standard includes IEC 61850-9-2 LE. The device also supports DNP3, IEC 60870-5-103, and Modbus? protocols. The SPA-ZC 302 adapter protocol supports the Profitbus DPV1 protocol. For redundant Ethernet solutions, the RET615 offers an optional communication module with an Ethernet interface. Redundant Ethernet solutions are built on Ethernet-based IEC 61850, Modbus? and DNP3 protocols. The IEC61850 standard in RET615 covers both vertical and horizontal communication, including GOOSE messages with switching signals and analog signals, and parameter tuning based on IEC 61850-8-1. RED615 also supports the process layer bus with analog voltage sampling values. Using this feature, Ethernet communication can replace analog electrical signal wiring. Using the IEC 61850-9-2LE protocol, measured values are transmitted as sampling values.
>>>>>型號:REF615E RET615 變壓器保護測控裝置 用于保護和測控雙繞組
