SW-190148 | 去離子機 Q-0730-A | R1.SW2/3
型號:SW-190148
類別:去離子機 Q-0730-A
貨期:現貨
質保:一年
去離子機Q-0730-A的相關信息如下:
產品描述:
特性:耐高溫、高效
用途:水過濾
適用對象:ABB變頻器
技術參數:
密度:1g/cm3
吸附率:1%
抗壓力:1kgf
孔隙率:1%
磨損率:2%
破碎率:3%
容重:15g/cm3
比表面積:12m2/g
鹽酸可溶率:14%
硬度:19
化學成分:未具體提及,但可能與水過濾相關
體積(LITER):16.8l
工作原理:
SW-190148 去離子機結合了電滲析與離子交換兩項技術,通過填充床電滲析(EDI)或連續電去離子(CDI)的方式,在電滲析器的隔膜之間裝填陰陽離子交換樹脂,從而提高膜間導電性,顯著增強由溶液到膜面的離子遷移,提高極限電流密度,達到去離子的目的。
操作與維護:
使用前需確保機器連接電源并處于正常工作狀態,正確設置參數,如溫度、壓力、流量等。
使用時需注意實時狀態,避免無樣品操作,并定期清洗機器內部部件和更換濾芯等易損件,以保證機器的長期使用壽命。
Model: SW-190148
Category: Deionizer Q-0730-A
Warranty: One year
Information about the deionizer Q-0730-A is as follows:
Product Description:
Features: High temperature resistance, high efficiency
Use: water filtration
Applicable object: ABB inverter
Technical parameters:
Density: 1g/cm3
Adsorption rate: 1%
Pressure resistance: 1kgf
Porosity: 1%
Wear rate: 2%
Breakage rate: 3%
Bulk weight: 15g/cm3
Specific surface area: 12m2/g
Hydrochloric acid soluble rate: 14%
Hardness: 19
Chemical composition: Not specifically mentioned, but may be related to water filtration
Volume (LITER) : 16.8l
How it works:
SW-190148 deionizer combines two technologies of electrodialysis and ion exchange. By means of packed bed electrodialysis (EDI) or continuous electrodeionization (CDI), CAND cation exchange resin is filled between the membranes of the electrodialysis unit, thereby improving the intermembrane conductivity, significantly enhancing the ion migration from solution to the membrane surface, and increasing the limiting current density. To achieve the purpose of deion.
Operation and maintenance:
Before use, ensure that the machine is connected to the power supply and in normal working state, and correctly set parameters, such as temperature, pressure, flow, etc.
When using, it is necessary to pay attention to the real-time status, avoid no sample operation, and regularly clean the internal parts of the machine and replace the wearing parts such as the filter element to ensure the long-term service life of the machine.