8AC120.60-1 | 編碼器接口 |8AC110.60-2 | 5AP920.1505-01
型號:8AC120.60-1
類別: 隔控制裝置 REC650
成色：全新/非全新
貨期：現貨
質保：一年
快遞：順豐/德邦
UR9KH 編碼器接口通常指的是用于連接編碼器和其他設備(如伺服驅動器、控制器或計算機)的連接器或接口標準。以下是對編碼器接口的一種清晰、分點表示和歸納：
1. 接口類型
伺服電機編碼器接頭：這類接頭常用于將編碼器與伺服電機連接起來，用于傳輸編碼器信號和電源。它們可能有不同的引腳數量和類型，如10芯、4芯、9芯、17芯等，取決于具體的編碼器型號和應用需求。
HDMI編碼器接口： UR9KH HDMI編碼器接口是一種視頻編碼器設備信號接口，用于將HDMI視頻源編碼壓縮成網絡流，實現視頻遠距離高清傳輸/直播。
2. 引腳定義
對于具有多個引腳的編碼器接頭，如信捷編碼器伺服插頭50針，引腳的定義通常包括：
電源引腳： UR9KH 用于連接編碼器的電源，如Vcc(電源正極)和GND(電源地)。
信號引腳：UR9KH 用于傳輸編碼器的信號，如位置、速度和方向等信息。常見的信號引腳有A、B、Z、U、V、W、DIR和INDEX等。
控制引腳：用于控制編碼器的運行狀態和參數設置，如ENABLE(使能引腳)、RESET(復位引腳)、MODE(模式引腳)等。
通信引腳：用于編碼器與其他設備進行通信，如TX(發送引腳)、RX(接收引腳)以及RS485-A和RS485-B等。
8AC120.60-1 | encoder interface | 8AC1101.60-2 | 5AP920.1505-01
Model :8AC120.60-1
Category: Isolation Control Device REC650
Finish: New/not new
Delivery time: from stock
Warranty: One year
Express: SF Express/Debon
The UR9KH encoder interface generally refers to a connector or interface standard for connecting encoders to other devices, such as servo drives, controllers, or computers. The following is a clear, point-of-point representation and summary of the encoder interface:
1. Interface type
Servo motor encoder connector: This type of connector is often used to connect the encoder to the servo motor for the transmission of the encoder signal and power. They may have different pin numbers and types, such as 10-core, 4-core, 9-core, 17-core, etc., depending on the specific encoder model and application needs.
HDMI encoder interface: UR9KH HDMI encoder interface is a video encoder device signal interface, used to compress the HDMI video source encoding into a network stream, to achieve remote high-definition video transmission/live broadcast.
2. Pin definition
For an encoder joint with multiple pins, such as the SNJ encoder servo plug 50 pin, the definition of the pin usually includes:
Power pin: UR9KH is used to connect the encoder's power supply, such as Vcc (power positive) and GND (power ground).
Signal pins: The UR9KH is used to transmit the signal of the encoder, such as position, speed and direction. Common signal pins are A, B, Z, U, V, W, DIR and INDEX.
Control pin: Used to control the encoder's operating status and parameter Settings, such as ENABLE (enable pin), RESET (reset pin), MODE (mode pin), etc.
Communication pins: Used for the encoder to communicate with other devices, such as TX (send pin), RX (receive pin), and RS485-A and RS485-B.
