>>>>>型號:8200-226 伺服閥驅動器 伺服位置控制器
【功能描述】
8200-226 伺服位置控制器 （SPC） 設計為伺服閥驅動器，可接受 DeviceNet 或基于 4 至 20 毫安的位置需求信號。 8200-226 可以精確定位比例伺服閥和積分伺服閥。
該控制器還能夠通過接受來自最多兩個冗余交流電設備或一個直流設備的反饋信號來處理閥門位置傳感。8200-226 安裝了基于 Windows 的軟件，以正確配置模型、調整可調組件，并通過遠程個人計算機監控設備的參數。
連接控制器時，請確保您選擇的電源線受到適當保護，為了正確保護控制器，該線路應為 5 A、125 V 保險絲，當控制器通電時，該保險絲應能夠承受 20 A 和 100 ms 的浪涌。確保控制器放置在遠離潛在高電壓或具有大電流的設備的區域，以及遠離可能接觸水的地方，不僅對于控制器的正常運行，而且對于正確安裝也至關重要。
>>>>>型號:8200-226 伺服閥驅動器 伺服位置控制器
【英文介紹】
The 8200-226 Servo Position Controller (SPC) is designed as a servo valve driver and accepts DeviceNet or position demand signals based on 4 to 20 mA. The 8200-226 allows precise positioning of proportional and integral servo valves.
The controller is also capable of handling valve position sensing by receiving feedback signals from up to two redundant AC devices or one DC device. The 8200-226 is equipped with Windows-based software to properly configure models, adjust adjustable components, and monitor the device's parameters from a remote personal computer.
When connecting the controller, make sure that the power cord you choose is properly protected, in order to properly protect the controller, the line should be A 5 A, 125 V fuse, which should be able to withstand a 20 A and 100 ms surge when the controller is energized. Ensuring that the controller is placed in an area away from potentially high voltages or devices with high currents, and away from areas where it may come into contact with water, is critical not only for the proper operation of the controller, but also for proper installation.
