>>>>型號:9905-864 控制器
【功能描述】
9905-864是一種控制器，它可以用于監測和控制不同的設備或系統。
以下是關于9905-864控制器的兩種不同應用：
9905-864是一種蒸汽渦輪控制器。蒸汽渦輪機是一種將蒸汽的熱能轉換為機械能的旋轉設備，廣泛應用于發電、工業驅動等領域。而WOODWARD 9905-864控制器則負責確保蒸汽渦輪機在各種工作條件下都能夠高效、
穩定地運行。該控制器通過接收來自蒸汽渦輪機的各種傳感器信號，如溫度、壓力、轉速等，實時監測渦輪機的運行狀態。根據這些實時數據，控制器會進行相應的計算和處理，然后輸出控制信號到蒸汽渦輪機的執行機構，
如調節閥、調速器等，從而實現對渦輪機的精確控制。此外，該控制器還具有高度集成化、板載繼電器計數等特點。
9905-864也用于本特利度控制器。這種控制器能提供連續、在線監測功能，適用于機械保護應用，并為早期識別機械故障提供重要的信息。其工作流程包括從現場取得傳感器輸入信號，然后提供給監測器框架內的監測器和
鍵相位通道。數據被采集后，與報警點比較并從監測器框架送到一個地方或多個地方處理。
>>>>>型號:9905-864 控制器
【英文介紹】
The 9905-864 is a controller that can be used to monitor and control different devices or systems.
Here are two different applications of the 9905-864 controller:
The 9905-864 is a steam turbine controller. Steam turbine is a kind of rotating equipment that converts the heat energy of steam into mechanical energy, which is widely used in power generation, industrial
drive and other fields. The WOODWARD 9905-864 controller is responsible for ensuring the efficient and stable operation of the steam turbine under a variety of operating conditions. By receiving various
sensor signals from the steam turbine, such as temperature, pressure, speed, etc., the controller monitors the operation status of the turbine in real time. According to these real-time data, the controller will
carry out the corresponding calculation and processing, and then output the control signal to the steam turbine actuator, such as the control valve, the governor, etc., so as to achieve the precise control of the
turbine. In addition, the controller also has the characteristics of high integration and on-board relay counting.
The 9905-864 is also used in Bentley degree controllers. The controller provides continuous, in-line monitoring for mechanical protection applications and provides important information for early identification
of mechanical failures. The workflow consists of taking the sensor input signal from the field and feeding it to the monitor and key phase channels within the monitor frame. After the data is collected, it is
compared with the alarm point and sent from the monitor frame to one or more places for processing.
>>>>>型號:9905-864 控制器
