>>>型號:330180-90-00 高性能傳感器 用于工業自動化和控制系統
【功能描述】
330180-90-00前置傳感器是一款高性能傳感器設備。它屬于本特利3300 XL系列的一部分，專門設計用于接收非接觸式3300系列或3300 XL電渦流探頭和延伸電纜的信號。接收到的信號隨后被傳送至本特利bently3500模塊、2300/20、
1900/65等振動監測器產品，以便進行進一步的分析和處理。
該前置傳感器的主要特點是其高靈敏度，靈敏度達到了7.87 mV/μm（200 mV/mil），這確保了它能夠精確捕捉到微小的振動和位移變化。此外，它的抗無線電干擾能力強，即使在玻璃纖維防護罩中安裝，也不會受到附近無線電信號的干擾。
安裝330180-90-00前置傳感器時，需要注意將其安裝在遠離高溫環境的地方，確保周圍環境無明顯的蒸汽和水珠、無腐蝕性的汽體，并保持干燥、振動小，以及前置器周圍的環境溫度與室溫相差不大。同時，安裝時必須避免有其他干擾信號
影響測量電路，因此需要采用適當?shù)母綦x和屏蔽接地，將信號所受的干擾降至最低限度。
這款前置傳感器非常適合用于壓縮系統、速度測量和流體薄膜軸承機器的狀態監測。它的單元和布線具有互換性，可以方便地與其他非3300 XL系列傳感器系統組件進行互換，這為用戶提供了更大的靈活性和便利性。
綜上所述，330180-90-00前置傳感器是一款功能強大、性能穩定且靈活的傳感器設備，適用于各種工業環境和應用場景，能夠?yàn)橛脩籼峁?zhǔn)確、可靠的設備狀態監測數據。
>>>>型號:330180-90-00 高性能傳感器 用于工業自動化和控制系統
【英文介紹】
The 330180-90-00 Front sensor is a high performance sensor device. It is part of the Bentley 3300 XL series and is specifically designed to receive signals from non-contact 3300 Series or 3300 XL eddy current probes
and extension cables. The received signal is then transmitted to vibration monitor products such as the Bentley bently3500 module, 2300/20, 1900/65 for further analysis and processing.
The main feature of the front sensor is its high sensitivity of 7.87 mV/μm (200 mV/mil), which ensures that it can accurately capture small vibration and displacement changes. In addition, its anti-radio interference ability
is strong, even if installed in the glass fiber shield, it will not be interfered with nearby radio signals.
When installing the 330180-90-00 front sensor, it is necessary to pay attention to install it in a place away from high temperature environment, ensure that there is no obvious steam and water droplets in the surrounding
environment, non-corrosive vapor body, and keep dry, small vibration, and the ambient temperature around the front is not much different from room temperature. At the same time, the installation must avoid other
interference signals affecting the measurement circuit, so it is necessary to use appropriate isolation and shielding ground to reduce the interference of the signal to a minimum.
This front-facing sensor is ideal for compression systems, speed measurement and condition monitoring of fluid film bearing machines. Its units and wiring are interchangeable and can be easily interchanged with other
non-3300 XL series sensor system components, which provides users with greater flexibility and convenience.
In summary, the 330180-90-00 front sensor is a powerful, stable and flexible sensor device, suitable for various industrial environments and application scenarios, and can provide users with accurate and reliable equipment condition monitoring data.
>>>>型號:330180-90-00 高性能傳感器 用于工業自動化和控制系統
