>>>>>型號:133819-02 系統監視器模塊
【功能描述】
133819-02是一款系統監視器模塊，具體為 133819-02 RTD/TC非隔離模塊。
該模塊在鋼鐵、電力、冶金、化工、石化等眾多行業中都有廣泛的應用。它符合美國石油學會(API)670的標準，主要用于監測離心式空氣壓縮機、
小型水泵、電機或風扇的振動。
該模塊能夠將簡單的振動信號按照比例變送成4至20mA的工業標準信號，供給設備的控制系統如PLC或DCS。這一轉換使得機組保護、報警和邏輯
控制變得更為便捷。此外，它是一款兩線制、環型供電的設備，可接受3300 NSv接近探頭的輸入信號及其匹配的延長電纜。
從特點上看，133819-02模塊支持選擇DIN導軌壓板或隔板固定螺釘作為標準選配件，使得安裝過程更為簡化。同時，其密封結構能夠在高濕度（
高達100%結露）環境下正常工作，顯示出良好的環境適應性。
133819-02模塊是一款功能強大、環境適應性良好的系統監視器模塊，適用于多種工業場景中的振動監測和信號處理任務。
>>>>>型號:133819-02 系統監視器模塊
【英文介紹】
133819-02 is a system monitor module, specifically 133819-02 RTD/TC non-isolated module.
The module has been widely used in many industries such as steel, electric power, metallurgy, chemical industry and petrochemical industry. It meets
the American Petroleum Institute (API)670 standard and is primarily used to monitor the vibration of centrifugal air compressors, small water pumps, motors or fans.
The module is capable of proportionally transforming simple vibration signals into industry-standard signals ranging from 4 to 20mA for the equipment's
control systems such as PLCS or DCS. This conversion makes unit protection, alarm and logic control more convenient. In addition, it is a two-wire,
ring-powered device that accepts the input signal from the 3300 NSv approach probe and its matching extension cable.
In terms of features, the 133819-02 module supports the selection of DIN rail pressure plates or partition screws as standard options, making the
installation process easier. At the same time, its sealing structure can work normally in high humidity (up to 100% condensation) environment,
showing good environmental adaptability.
The 133819-02 module is a powerful and environmentally adaptable system monitor module for vibration monitoring and signal processing
tasks in a variety of industrial scenarios.
>>>>>型號:133819-02 系統監視器模塊
