3BHE009681R0101 GVC750BE101 | 工廠網絡接口模塊 | P7LA HNEF105323R0002
型號：3BHE009681R0101 GVC750BE101
類別：PN800 工廠網絡接口模塊
質保：365天
貨期：3-5天/周
產品凈厚度/長度：243.84 毫米
產品凈高：73.66 毫米
產品凈寬：170.18 毫米
3BHE009681R0101 GVC750BE101 勵磁器控制模塊是發電機組中的關鍵組件，其主要作用在于控制電磁勵磁系統，進而控制電磁線圈的電流，從而調節發電機的電壓和電流輸出值。具體來說，勵磁控制器通過對勵磁繞組電流進行控制和調節，使得發電機組的磁場保持在恒定的大小和穩定的狀態下。當負載發生變化時，勵磁控制器會自動調整勵磁電流的大小和參數，以調節發電機的輸出電壓和電流，并保持其穩定運行。此外，如果發電機出現過電壓、過電流等故障，勵磁控制器也會立即發出相應的信號，通知監控系統進行處理。
在功能實現上，3BHE009681R0101 GVC750BE101 勵磁控制器首先將電力系統中的模擬信號采集進入控制芯片中，進行當前工況的分析與計算。然后將計算所得的勵磁控制信號輸入至勵磁功率模塊中，勵磁功率模塊根據輸入控制信號的大小控制勵磁電流的大小，進而控制發電機的運行方式。
在結構上，3BHE009681R0101 GVC750BE101 勵磁控制器通常包括測量比較單元和綜合放大單元。測量比較單元負責測量發電機電壓信號，將其按比例變換成直流電壓信號，并與給定直流電壓進行比較，送出發電機電壓偏差信號。而綜合放大單元?jiǎng)t由綜合放大環節、比例積分環節和適應器環節組成，負責將各種基本測量輸出的、反饋和輔助限制生成的、以及穩定和補償反應的各種直流信號加以綜合放大，并輸出至后續環節進行進一步處理。
3BHE009681R0101 GVC750BE101 | Factory Network interface module | P7LA HNEF105323R0002
Model: 3BHE009681R0101 GVC750BE101
Category: PN800 Factory network interface module
Warranty: 365 days
Delivery time: 3-5 days/week
Net product thickness/length: 243.84 mm
Product height: 73.66 mm
Product net width: 170.18mm
3BHE009681R0101 GVC750BE101 exciter control module is a key component in the generator set, its main role is to control the electromagnetic excitation system, and then control the current of the electromagnetic coil, so as to adjust the voltage and current output value of the generator. Specifically, the excitation controller controls and adjusts the current of the excitation winding to keep the magnetic field of the generator set in a constant size and stable state. When the load changes, the excitation controller will automatically adjust the size and parameters of the excitation current to adjust the output voltage and current of the generator and maintain its stable operation. In addition, if the generator overvoltage, overcurrent and other failures, the excitation controller will immediately send a corresponding signal to notify the monitoring system for processing.
In terms of function implementation, the 3BHE009681R0101 GVC750BE101 excitation controller first collects the analog signal in the power system into the control chip to analyze and calculate the current working condition. Then the calculated excitation control signal is input to the excitation power module. The excitation power module controls the excitation current according to the input control signal, and then controls the operation mode of the generator.
Structurally, the 3BHE009681R0101 GVC750BE101 excitation controller usually includes a measurement comparison unit and a comprehensive amplification unit. The measurement and comparison unit is responsible for measuring the generator voltage signal, converting it into a DC voltage signal proportionally, and comparing it with the given DC voltage, sending the motor voltage deviation signal. The comprehensive amplification unit is composed of a comprehensive amplification link, a proportional integration link and an adapter link, which is responsible for comprehensively amplifying various DC signals of basic measurement output, feedback and auxiliary limit generation, as well as stabilization and compensation reactions, and output to the subsequent link for further processing.
